Dahua MCVR6204 User Manual Download Page 197

Page: 197 / 239

Web Operations

186

The available Wi-Fi networks list including the information such as connection

mode, authorization mode, and signal intensity.

2) Double-click the Wi-Fi that you want to connect, enter the password, and then click

Save



Manual add

1) Click

Static Setting

The WIFI setting interface is displayed. See Figure 5-71.

WIFI setting

Figure 5-71

2) Enter SSID, select priority level and verification type, set IP address, subnet mask,

and gateway.

If you select the

DHCP

check box, after the connection succeeded, the system will

automatically obtain the IP address, subnet mask, and gateway.

3) Click

Save

Click

Save

Step 4

Click

Refresh

to refresh the connection status.

After connection is succeeded, you can view the current hotspot, IP address, subnet

mask, and gateway in the

WIFI Working Info

area.

5.3.2.7.3 Configuring Wi-Fi Hotspot

The Device can work as a hotspot to share the network connection to other terminals. The

terminals that are connected to the hotspot can login the Device through IP address

(192.168.2.108). After login, you can preview the video on the Device.

Select

SETUP > NETWORK > WIFI

Step 1

The

WIFI

interface is displayed.

In the

Working Mode Selection

list, select

Step 2

The Ap interface is displayed. See Figure 5-72.

Summary of Contents for MCVR6204
















































































































































































































































Search results

Summary of Contents for MCVR6204

Reviews:

Dahua MCVR6204, User Manual, Page: 197 / 239

Search results

Summary of Contents for MCVR6204

Reviews: