Web Operation 81
IP conflict
Figure 4-62
MAC conflict
Figure 4-63
Select
Enable
to enable the alarm function.
Step 2
Configure the parameters. See Table 4-17 for details.
Step 3
Table 4-17 Abnormal parameters description
Parameter
Description
Output Delay
After the alarm is stopped, the alarm output is delayed for some
time, ranging from 0 seconds through 300 seconds.
Buzzer
The system activates a buzzer alarm when an alarm event
occurs.
Log
The log records alarm information when an alarm event occurs.
Click
Save
.
Step 4
4.5.4 Signal Management
You can manage network signal, local signal and signal group.
4.5.4.1 Network Signal
You can add devices in the network, preview and display network signal on the video wall, and
also control the remote device.
The device shall have a decoding card, so network signal can be decoded and displayed on the
video wall.
Select
Setup > Signal Management > Network Signal.
The
Network Signal
interface is
displayed. See Figure 4-64.