Device Installation 21
Before you insert board card, please remove the black port sheath first.
Remove sheath
Figure 2-2
Insert interface board and front panel of main control panel into "M" slot of the
Step 3
chassis, and then tighten screws. See Figure 2-3.
Install board card
Figure 2-3
Insert the interface board, tighten the set screws, and then insert front panel.
When inserting main control panel and control panel, pull the extraction tool,
and then insert the panel in place by pushing the extraction tool inward.
According to need, insert interface board and front panel of business card, and
Step 4
then tighten screws. Installation is the same as that of main control panel.
Connect monitor of local interface to any VGA or DVI port on interface board of
Step 5
main control panel. See Figure 2-4.