Web Operation 79
4.5.2.3 IP Filter
Set network authority of other devices to access video matrix platform, to enhance device
network and data security. Network authority strategy includes white list and black list.
After white list is enabled, only devices in the white list can login web interface successfully.
After black list is enabled, devices in the black list cannot login web interface.
White list and black list cannot be enabled at the same time.
Select
Setup > Network > IP Filter
.
Step 1
The
IP Filter
interface is displayed. See Figure 4-58.
IP filter
Figure 4-58
Select the
Enable
check box.
Step 2
The system displays white list and black list single selection box.
Add white list or black list.
Step 3
1) Select White List or Black List.
2) Click
Add
.
The
Add
interface is displayed. See Figure 4-59.
Add
Figure 4-59
3) Configure IP address information. See Table 4-16 for details.
Table 4-16 IP address parameters description
Parameter Description
IP Address
Click the drop-down list, and select the adding mode.
IP address: Enter the IP address you want to add to black list or white list.
IP segment: Enter the IP segment you want to add to black list or white list.
You can add multiple IP hosts at the same time.
IPv4
Select IP address protocol from the drop-down list.
IPv4: IP address adopts IPv4 format. For example, 192.168.5.10.
4) Click
OK
.
Device goes back to
IP Filter
interface.
Click
OK
.
Step 4