Web Operation 70
4.5.1.7.2 Close Buzzer
You can configure buzzer time. In case of alarm, the system will beep continuously according to
the set time. You can close buzzer according to your need.
Select
Setup > System Config > Fan Control > Close Buzzer
.
Step 1
The
Close Buzzer
interface is displayed. See Figure 4-49.
Fan control
–Close Buzzer
Figure 4-49
Configure time setup.
Step 2
Click
OK
.
Step 3
Click
Close Buzzer
to close the buzzer alarm function.
4.5.1.8 PTZ Setup
PTZ is a mechanical platform that carries camera and protective hood, and provides remote
all-round control. PTZ moves horizontally and vertically, and thus gives the camera an all-round
and multi-angle view. In order to control PTZ, device protocol, baud rate, address and parity
shall be the same as camera protocol, baud rate, address and parity.
Select
Setup > System Config > PTZ Setup
.
Step 1
The
PTZ Setup
interface is displayed. See Figure 4-50.