Web Operation 100
Parameter
Description
Resolution
Select
Customized
to configure resolution of output screen corresponding
to each slot.
Click
OK
.
Step 8
Click
Done
.
Step 9
The system exits
Video Wall Layout Setup
interface. The new video wall is displayed
in video wall list. See Figure 4-94.
Adding is completed
Figure 4-94
New video wall is ON by default. You can configure video wall status to be ON or OFF,
so as to turn on or off the video wall.
4.5.5.1.2 Modifying Video Wall
Click
, and modify video wall information in the pop-up
Video Wall Layout Setup
interface.
See "4.5.5.1.1 Adding Video Wall."
4.5.5.1.3 Deleting Video Wall
Tick the video wall check box, click
Delete
or
, to delete the selected video wall after
confirmation.
4.5.5.2 Screen Management
You can configure screen parameters to turn on and turn off the screen.
4.5.5.2.1 Screen Setup
Configure manufacturer, serial port and com address of every output screen, in order to realize
communications between screen and device. Com address shall be the same with DIP address
of video wall.
Select
Setup > Display Management > Screen Management > Screen Setup
.
Step 1
The
Screen Setup
interface is displayed. See Figure 4-95.