Local Interface Configuration 31
3.2.3.2 Network
Configure device network parameters, so that device can communicate with devices in the
network.
In the main menu, select
System Setting > Network
.
Step 1
The
Network
interface is displayed. See Figure 3-8.
Network
Figure 3-8
Configure parameters. See Table 3-4.
Step 2
Table 3-4 Network parameters description
Parameter
Description
Net Mode
The default setting is fault tolerance.
MAC Address
Configure MAC address.
Network
Device
Name
It is Bond1 by default.
IP Version
It is IPv4 by default.
IP Address
Enter numbers to change the IP address, and then configure its
Subnet Mask
and
Gateway
.