Web Operation 101
Screen setup
Figure 4-95
Click drop-down list or text box to configure manufacturer, serial port and com address.
Step 2
They shall be the same with actual manufacturer, serial port and com address
(DIP address) of video wall.
Click drop-down list at the top, to configure manufacturer and serial port together.
Click
Save
.
Step 3
4.5.5.2.2 Screen ON/OFF
According to preset interval and time, the device sends ON/OFF commands to all screens
continuously, and ensures that each screen receives commands and turns ON/OFF.
Select
Setup > Display Management > Screen Management > Screen ON/OFF
.
Step 1
The
Screen ON/OFF
interface is displayed. See Figure 4-96.
Screen ON/OFF
Figure 4-96
Configure the parameters. See Table 4-24.
Step 2
Table 4-24 Parameters description
Parameter
Description
Regional Switch Enable
Select the check box to enable regional switch function.
Switch Times
The times of sending ON/OFF command.
Switch Interval
Interval of sending ON/OFF command.
Screen Interval
The interval for every screen to receive ON/OFF command.