Web Operation 105
Parameter
Description
IVS Rule
After the camera enables IVS rule function, rule line turns red and
flickers if a moving object enters the alarm zone of blue rule line.
Tracking Box
After the camera enables tracking box function, the system selects
and tracks moving objects with a green box on the output interface.
Window Prompt Info
Prompt information will be displayed on the window.
Do not decode when
being covered
The covered window will pause decoding.
Platform NetCard Pull
Stream
Enable platform netcard pull stream function.
Device NetCard Pull
Stream
Enable device netcard pull stream function.
Manual setting window
wide and height
Double click window on the video wall to adjust window coordinate
and size. See “4.3.2.3 Configuring Window Information.”
Abnormal
Stream
Filtering
The system checks and filters abnormal stream, in order to prevent
green screen.
Plan Neat Switching
Plan stream will be switched synchronously and neatly, to enhance
visual effect.
Decoding Strategy
Select the check box. Fluency adjustment zone is displayed. You
can drag the slider to adjust window fluency.
You can only adjust fluency of network signal.
Click
Save
.
Step 3
4.5.5.4 Output Name
You can configure output name and control ID of each channel on the board card. Control ID
can correspond to the binding source (such as keyboard), so the binding source can be
displayed on the video wall.
Output name is only used to distinguish channels.
Select output screens through control ID, and you can configure video wall display of
keyboard or other devices.
Select
Setup > Display Management > Output Name
.
Step 1
The
Output Name
interface is displayed. See Figure 4-100.