WEB Client 66
ITC push config
Configure parameters according to actual requirement. Please refer to Table 5-28 for
more details.
Table 5-28 ITC Push
Parameter
Note
Enable
Select it and enable the push function of passing vehicle info.
No Plate Upload
Select it and enable the unlicensed push function.
Server IP
It is the IP of server which receives passing vehicle info.
Server Port
The port of server which receives passing vehicle info.
Username
Username and password used to log in server.
Password
Http URL
Http URLprefix info of uploaded picture data.
Device ID
Device ID
Http Timeout
Timeout of Http push message.
Keep Alive Time
It can set keep alive time.
Encode Mode
Encode mode of push content, which includes UTF8 and GB2312.
Push Picture Config
Select the pushed picture type, which includes original picture and dig
picture.
Click
OK
to finish configuration.
5.4.4 Event
In this section, you can set alarm and abnormality.
5.4.4.1 Alarm
5.4.4.1.1 Relay Activation
In this interface, you can set several parameters of relay activation such as relay-in, period,
anti-dither and sensor type etc.
Select
Setting
>
Event
>
Alarm
>
Relay Activation
.
