Dahua ITC215-PW4I-LZF27135 User Manual Download Page 58

Page: 58 / 109

WEB Client 48

Parameter Note

Modify

Click it and all the OSD info status is displayed as

except line feed. Click

to modify the prefix, suffix, content and separator of corresponding OSD

option.

Delete

Click it and all the selected OSD info status is displayed as

, click

delete corresponding OSD option.

Clear

Delete all the OSD info.

Line Feed

After selecting some OSD info, click

New Line

and next OSD info will be

displayed on the picture.

Click

to finish configuration.

5.4.1.5 Snap Cutout

In this section, plate cutout function will be enabled. The system will cut out the recognized

plate picture and save it under the storage path.

Select Setting > ITC > Snap Cutout.

The

Snap Cutout

interface is displayed. See Figure 5-32.

Snap Cutout

Select

Snap Cutout

and

Plate

, and then plate cutout function is enabled.

Click

to finish configuration.

5.4.1.6 Extra Device

5.4.1.6.1 Extra Device Status

In this interface, it can view the type, number, status and match status of extra device.

If it is connected to vehicle detector of our company and the com protocol selects vehicle

detector, then it can detect if the associated info and status of vehicle detector is normal.

Select

Setting

ITC

Extra Device

Extra Device Status

and the interface of

Extra Device

Status

is displayed. See Figure 5-33.

Summary of Contents for ITC215-PW4I-LZF27135














































































































Search results

Summary of Contents for ITC215-PW4I-LZF27135

Reviews:

Related manuals for ITC215-PW4I-LZF27135

Brands by name

Popular brands

Dahua ITC215-PW4I-LZF27135, User Manual

Search results

Summary of Contents for ITC215-PW4I-LZF27135

Reviews:

Related manuals for ITC215-PW4I-LZF27135

Brands by name

Popular brands