Dahua ITC215-PW4I-LZF27135 User Manual Download Page 5

Page: 5 / 109

Foreword

About the Manual



The Manual is for reference only. If there is inconsistency between the Manual and the

actual product, the actual product shall prevail.



We are not liable for any loss caused by the operations that do not comply with the Manual.



The Manual would be updated according to the latest laws and regulations of related

regions. For detailed information, see the paper manual, CD-ROM, QR code or our official

website. If there is inconsistency between paper manual and the electronic version, the

electronic version shall prevail.



All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the Manual. Please

contact the customer service for the latest program and supplementary documentation.



There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our final explanation.



Upgrade the reader software or try other mainstream reader software if the Manual (in PDF

format) cannot be opened.



All trademarks, registered trademarks and the company names in the Manual are the

properties of their respective owners.



Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.



If there is any uncertainty or controversy, please refer to our final explanation.

Summary of Contents for ITC215-PW4I-LZF27135














































































































Search results

Summary of Contents for ITC215-PW4I-LZF27135

Reviews:

Related manuals for ITC215-PW4I-LZF27135

Brands by name

Popular brands

Dahua ITC215-PW4I-LZF27135, User Manual

Search results

Summary of Contents for ITC215-PW4I-LZF27135

Reviews:

Related manuals for ITC215-PW4I-LZF27135

Brands by name

Popular brands