Dahua ARC6416C series, User Manual

Page: 93 / 117

Figure 6-55
Step 2. Set parameters, see Chart 6-21.
Parameter Note
Date Format Select date format.
Time Format 24-hour and 12-hour.
Date
Separator Set date separator.
Time Zone According to current zone, set time zone.
System Time Set device current time and date.
Click Sync PC to sync time with PC.
Warning:
System time is very important, only change it when necessary.
DST In some countries or regions, you can implement daylight saving
time. You can select whether to enable daylight saving time
according to your actual needs. The steps are as follows:
1. 1. Check "Daylight Saving Time" to turn on daylight saving
time.
2. 2. Select Daylight Saving Time Type, including Week and
Date.
3. 3. Set the start and end time of daylight saving time.
NTP After NTP is set, the device automatically synchronizes the time to
the NTP server. The operation method is as follows:
1. Check the "NTP settings" to enable the NTP time update
function.
2. Configure the parameters.
service is installed.
device and NTP server time.
limited to 123.
Update interval: The interval device synchronizes the time to the
NTP server. The maximum update interval is 65535 minutes.
Chart 6-21
Step 3. Click OK.
6.5.1.3 Holiday