Dahua ARC6416C series, User Manual

Page: 13 / 117

Note Do not have short glitch exposed on the outside, which will puncture insulating tape
and other cause short circuit of metal, at the same time be sure to wrap in a uniform
appearance, with thickness not less than two layers of insulating tape.
Terminal
Peel the line about 1 cm, (if it is stranded cotton-covered wire, use hands to twist them
together) and fold twice. After terminal is inserted, tighten the terminal screws.
Note that the terminal screws must be very tight, and use hand to pull the inserted wire,
confirm this line is very strong.
Weld
When welding on site, be sure to consider security issues of soldering iron, must be
careful not to damage other device during welding
.
3.2 Install Field Surveillance Unit
The device adopts wall mount installation; first install hangers onto device, hang the device on
wall via hanger and finally fix the device with screws.
3.3 Install Peripherals
For instructions, please refer to user
’ manual of each peripheral.
3.4 Wiring
3.4.1 Main Power Wiring
The device provides two methods of main power (DC-48V and DC12V) to power the device, see
Figure 3-1.
Figure 3-1
3.4.2 Network Port Wring