Dahua ARC6416C series, User Manual

Page: 66 / 117

Parameter Note
Username SMTP server username
Password SMTP server password
Sender Send email.
Receiver Receive email. Support max 3 mail addresses.
Encryption Type Select encryption type, as
：
NONE, SSL and TLS.
Title Support letter, number input, up to 63 characters.
Attachment Check Attachment, allow to send attachment files.
Interval
Time range 0 ~ 3600 seconds, 0 means no interval to send mail.
After setting the interval time, when the alarm, video detection,
abnormal events trigger EMAIL alarm, the message will not be
triggered according to the alarm signal to send EMAIL immediately,
but according to the same type of event before the interval of mail
sent, mainly to avoid flooding mails produced by frequent abnormal
events, and mail server’s excessive pressure.
Health Enable
Check Health Enable to enable the Health mail function.
Health messages can be sent by the system in accordance with the
interval time (30 minutes to 1440 minutes) from the mail test
information to determine whether the success of mail links.
Test
Test whether the e-mail function is normal. In the case of the correct
configuration, the mailbox will receive a test message. Before mail
testing, you need to click "OK" to save the mail configuration
information.
Chart 6-9
Step 3. Click OK.
6.2.9 FTP
You can back up record and picture into FTP server.
Step 1. Select Setup>Network>FTP, see Figure 6-20.
Figure 6-20
Step 2.
Check Enable, to enable FTP upload and see
Parameter Note
Host IP Host IP address for installing FTP server tool.
Port Default is 21.
Username,
password
Username and password to access FTP server.