Dahua ARC6416C series User Manual Download Page 102

Page: 102 / 117

You can view the search results for the log in the System log information area box and back

up or clear the logs as needed.



Click Backup, select path to save log. Saved log can be used for troubleshooting later.



Click Clear to delete all logs. Be careful of this operation.

6.6.3

Online Users

In Setup>Info>Online Users, view users logged in this device, including username, user group,

IP address, login time, see Figure 6-70.

Figure 6-70

6.6.4

HDD

You can view HDD info of this device, including physical location, status, free space, path and

record period. See Figure 6-71.

Figure 6-71

Double click HDD you want to view, system shows SMART info interface, you can view HDD

name, model, SN and health status here.

Summary of Contents for ARC6416C series






















































































































Search results

Summary of Contents for ARC6416C series

Reviews:

Related manuals for ARC6416C series

Brands by name

Popular brands

Dahua ARC6416C series, User Manual

Search results

Summary of Contents for ARC6416C series

Reviews:

Related manuals for ARC6416C series

Brands by name

Popular brands