Dahua Technology XVR Series User Manual Download Page 281

Page: 281 / 363

User’s Manual

269

status, total space and free space, and serial number of the HDD port.

Disk manager

Configuring the settings for the HDD manager.



HDD type setting: In the Properties list, select Read/Write, Read Only, and then click

Apply to save the settings.



HDD format: Select the HDD that you want to format, click Format, and enable Clear

HDD database in the pop-up message, click OK and enter the password of admin

user in the prompted dialog box, click OK and then following the on-screen
instructions to complete formatting.

Formatting HDD will erase all data on the disk, proceed with caution.

Note

Summary of Contents for XVR Series












































































































































































































































































































































































Search results

Summary of Contents for XVR Series

Reviews:

Related manuals for XVR Series

Brands by name

Popular brands

Dahua Technology XVR Series, User Manual

Search results

Summary of Contents for XVR Series

Reviews:

Related manuals for XVR Series

Brands by name

Popular brands