Dahua Technology XVR Series User Manual Download Page 312

Page: 312 / 363

User’s Manual

300

Click Export.

There is a folder under the name style of "Config_[YYYYMMDDhhmmss]". Double-click this
folder to view the backup files.

Importing System Settings

Insert a USB storage device containing the exported configuration files from another Device)
into one of the USB ports on the Device.

Select Main Menu > SYSTEM > Import/Export.

Click Refresh to refresh the interface.
The connected USB storage device is displayed.

Click on the configuration folder (under the name style of "Config_[YYYYMMDDhhmmss]")
that you want to import.

Click Import.
The Device will reboot after the imported is succeeded.

5.20.5

Restoring Default Settings

Only Admin account supports this function.
You can select the settings that you want to restore to the factory default.

Select Main Menu > MAINTAIN > Manager > Default.

Default

Restore the settings.



Click Default to restore all parameters to default settings except parameters such as

Summary of Contents for XVR Series












































































































































































































































































































































































Search results

Summary of Contents for XVR Series

Reviews:

Related manuals for XVR Series

Brands by name

Popular brands

Dahua Technology XVR Series, User Manual

Search results

Summary of Contents for XVR Series

Reviews:

Related manuals for XVR Series

Brands by name

Popular brands