Dahua Technology XVR Series User Manual Download Page 77

Page: 77 / 363

User’s Manual

This message appears only when there are digital channels instead of only analog channels.

Sync info

5.1.3.3

Using Reset Button on the Mainboard

You can always use the reset button on the mainboard to reset the Device to the factory default.

Not all models are provided with reset button.

Disconnect the Device from power source, and then remove the cover panel. For details about
removing the cover panel, see "2.2 Installing HDD."

Find the reset button on the mainboard, and then press and hold the reset button for 5
seconds to 10 seconds.

Reset button

Restart the Device.

Summary of Contents for XVR Series












































































































































































































































































































































































Search results

Summary of Contents for XVR Series

Reviews:

Related manuals for XVR Series

Brands by name

Popular brands

Dahua Technology XVR Series, User Manual

Search results

Summary of Contents for XVR Series

Reviews:

Related manuals for XVR Series

Brands by name

Popular brands