Dahua Technology XVR Series, User Manual

Page: 191 / 363

User’s Manual
179
Parameter Description
Send Email
Select the Send Email check box to enable the system to send an email
notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > Email.
Buzzer Select the check box to activate a buzzer noise at the Device.
Log Select the check box to enable the Device to record a local alarm log.
Alarm Tone
Select to enable audio broadcast/alarm tone in response to a HDD alarm
event.
Click Apply to complete the settings.
5.10.5.2 Configuring Network Event Settings
Select Main Menu > ALARM > Exception > Network.
Network
Configure the settings for the Network event.
Table 5-43 Network event parameters
Parameter Description
Event Type
In the Event Type list, select Offlice, IP Conflict, or MAC Conflict as the
event type.
Enable Enable or disable the Network event detection function.