Dahua Technology DHI-XVR5108HS-4K Page 94 User Manual Download

Page: 94 / 318

User's Manual

Pattern

Reset

Autoscan

Click the AUX Config icon to open the
PTZ functions settings interface.

AUX Switch

Click the Enter Menu icon to open the
MENU OPERATION interface.

5.4.3

Configuring PTZ Functions

5.4.3.1

Configuring Presets

On the expanded PTZ control panel, click

The Preset interface is displayed.

Preset interface

Click the direction arrows to the required position.

In the Preset box, enter the value to represent the required position.

Click Setting to complete the preset settings.

5.4.3.2

Configuring Tours

On the expanded PTZ control panel, click

The PTZ interface is displayed.

Click the Tour tab.

Summary of Contents for DHI-XVR5108HS-4K































































































































































































































































































































Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands

Dahua Technology DHI-XVR5108HS-4K, User Manual

Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands