Dahua Technology DHI-XVR5108HS-4K Page 240 User Manual Download

Page: 240 / 318

User's Manual

232

Add user

Enter user name, password, and select the group that you want this account to belong to.

Click OK to save the settings.

Click

to modify the account; Click

to delete the account.

Audio Management

Audio management function manages audio files and configures the playing schedule. When there is
an alarm event, the audio file can be activated.

5.16.1

Configuring Audio Files

You can add audio files, listen to audio files, rename and delete audio files, and configure the audio
volume.

Select Main Menu > AUDIO > FILE MANAGER.

Summary of Contents for DHI-XVR5108HS-4K































































































































































































































































































































Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands

Dahua Technology DHI-XVR5108HS-4K, User Manual

Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands