Dahua Technology DHI-XVR5108HS-4K Page 266 User Manual Download

Page: 266 / 318

User's Manual

258

Connected USB storage device

Click Export.

There is a folder under the name style of "Config_[YYYYMMDDhhmmss]". Double-click this
folder to view the backup files.

Importing System Settings

Insert a USB storage device containing the exported configuration files from another Device)
into one of the USB ports on the Device.

Select Main Menu > SYSTEM > IMP/EXP.
The IMP/EXP interface is displayed.

Click Refresh to refresh the interface.
The connected USB storage device is displayed.

Click on the configuration folder (under the name style of "Config_[YYYYMMDDhhmmss]")
that you want to import.

Click Import.
The Device will reboot after the imported is succeeded.

5.18.6

Restoring Default Settings

Only Admin account supports this function.
You can select the settings that you want to restore to the factory default.

Summary of Contents for DHI-XVR5108HS-4K































































































































































































































































































































Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands

Dahua Technology DHI-XVR5108HS-4K, User Manual

Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands