Dahua Technology DHI-XVR5108HS-4K Page 120 User Manual Download

Page: 120 / 318

User's Manual

112

5.6.1.7

Exporting IP Address

You can export the added IP address to the USB storage device.

The exported information is saved in .csv file, which includes IP address, port number, channel
number, manufacturer, user name, and password.

Insert the USB storage device to the USB port of the Device.

Click Export.

Browse

Configure the save path.

Click OK to save the settings.
A pop-up message indicating "Successfully exported" is displayed.

Click OK.

5.6.1.8

Importing IP Address

You can add remote devices by importing IP address information.

Insert the USB storage device to the USB port of the Device.

Click Import.

Summary of Contents for DHI-XVR5108HS-4K































































































































































































































































































































Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands

Dahua Technology DHI-XVR5108HS-4K, User Manual

Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands