Dahua Technology DHI-XVR5108HS-4K Page 166 User Manual Download

Page: 166 / 318

User's Manual

158

5.10.3

Face Detection

You can configure the face detection settings and search the detected faces in the defined time period.

5.10.3.1

Configuring Face Detection Settings

When the Device detects the human faces, the system activates alarms.



Not all models support this function.



Smart IPC must be equipped with face detect function.

Select Main Menu > FACE DETECT > Parameters.
The Human Face interface is displayed.

Human face

Configure the settings for the face detection parameters.

Table 5-43

Face detection parameters

Parameter

Description

Channel

In the Channel list, select a channel to set the face detection.

Summary of Contents for DHI-XVR5108HS-4K































































































































































































































































































































Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands

Dahua Technology DHI-XVR5108HS-4K, User Manual

Search results

Summary of Contents for DHI-XVR5108HS-4K

Reviews:

Related manuals for DHI-XVR5108HS-4K

Brands by name

Popular brands