Quick Start Guide
29
Related Operations
●
: Edit the information on the device.
Only sub controllers support the below operations.
●
: Go to the webpage of the sub controller.
●
: Log out of the device.
●
: Delete the device.
5.2.4.2 Adding Devices in Batches
We recommend you use the auto-search function when you add sub controllers in batches. Make
sure the sub controllers you want to add are on the same network segment.
Procedure
Step 1
On the home page, Click
Device Management
, and then click
Search Device
.
●
Click
Start Search
to search for devices on the same LAN.
●
Enter a range for the network segment, and then click
Search
.
Figure 5-11 Auto search
All devices that were searched for will be displayed.
You can select devices from the list, and click
Device Initialization
to initialize them in
batches.
To ensure the security of devices, initialization is not supported for devices on different
segments.
Step 2
Select the Controllers that you want to add to the Platform, and then click
Add
.
Step 3
Enter the username and password of the sub controller, and then click
OK
.
