Quick Start Guide
28
Only the main controller comes with a management platform.
5.2.4.1 Adding Device Individually
You can add sub controllers one by one by entering their IP addresses or domain names.
Procedure
Step 1
On the home page, Click
Device Management
, and then click
Add
.
Step 2
Enter the device information.
Figure 5-9 Device information
Table 5-4 Device parameters Description
Parameter
Description
Device Name
Enter the name of the Controller. We recommend you name it
after its installation area.
Add Mode
Select
IP
to add the Access Controller by entering its IP address.
IP Address
Enter the IP address of the controller.
Port
The port number is 37777 by default.
Username/Password
Enter the username and password of the Controller.
Step 3
Click
OK
.
The added controllers are displayed on the
Device Management
page.
Figure 5-10 Successfully add devices
If the controller was set as the main controller while you were going through the login
wizard, the controller will be added to the management platform automatically and
function as both the main controller and sub controller.
