Quick Start Guide
5
Figure 2-2 Reader connector
Table 2-2 Reader connector description
Port
Description
12 V
Supplies 12 VDC power for the reader.
GND
Connects the grounding wire.
CASE
Connects the reader tampering alarm.
D1
Connects a Wiegand reader.
D0
LED1
Signal response. Connects to the signal wire of the Wiegand reader.
RS485B
Connects a RS-485 reader.
RS485A
BEEP
Reserved port.
LED2
Reserved port.
Figure 2-3 LED indicator
Table 2-3 Description of LED indicator ports
Port
Port Name
Indicator color
Status
STATUS
Power indicator
Solid green
Working normally
Solid red
The system starts
Blue light flashes
System is updating.
L2
Lock 2 indicator
Solid yellow and green
Lock open
Solid red
Lock closed
L1
Lock 1 indicator
Solid yellow and green
Lock open
