![background image](http://html1.mh-extra.com/html/dahua-technology/d-xvr5108h-4kl-x-8p/d-xvr5108h-4kl-x-8p_user-manual_500724161.webp)
Local Configurations
148
Parameter
Description
Alarm Release
Click
OK
to
clear all alarm output status.
Table 5-36
Click
Apply
to save the settings.
Step 3
5.10.3.2 Configuring White Light
When the motion detection alarm is activated, the system links the camera to generate white
light alarm.
To use this function, connect at least one white light camera to your Device.
Select
Main Menu > ALARM > ALARM OUTPUT > White Light
.
Step 1
The
White Light
interface is displayed. See Figure 5-118.
Figure 5-118
Configure the settings for the white light parameters. See Table 5-37.
Step 2
Parameter
Description
Channel
In the
Channel
list, select a channel that is connected to a white
light camera.
Latch
Set a length of time for the Device to delay turning off alarm after
the alarm is cancelled. The value ranges from 5 seconds to 30
seconds, and the default value is 5 seconds.
Mode
Set the alarm mode of white light to be
Solid on
or
Flash
.
Flash Frequency
When setting the alarm mode of white light to be
Flash
, you can
select the flash frequency from
Low
,
Middle
, and
High
.
Summary of Contents for D-XVR5108H-4KL-X-8P
