Dahua Technology D-XVR5108H-4KL-X-8P User Manual Download Page 20

Page: 20 / 330

Getting Started

device, and then fix the

screws.

2.2.4 DH-XVR4216AN-X/DH-XVR4232AN-X/DH-XVR5216AN-X/D

H-XVR5232AN-X/DH-XVR5208AN-4KL-X/DH-XVR5216AN-4KL-X/

DH-XVR5216A-X/DH-XVR7208A-4KL-X/DH-XVR7216A-4KL-X/DH-

XVR7208A-4K-X/DH-XVR5108H-4KL-X-8P/DH-XVR5208AN-4KL-X

-8P/DH-XVR5216AN-4KL-X-16P

1. Remove the screws on

the cover.

2. Fix the screws onto the

HDD, but do not be

fastened.

3. Put the HDD into the

Device.

4. Turn the device to see the

back side of it. Align the

screws of the HDD with

the holes on the back of

the device, and then fix

the screws.

5. Use the HDD cable and

power cable to connect

HDD and mainboard.

6. Put back the cover and fix

the screws.

2.2.5 DH-XVR7416L-4KL-X/DH-XVR5432L-X

1. Remove the screws on

2. Use the screws to fix the

3. Connect one end of HDD

Summary of Contents for D-XVR5108H-4KL-X-8P











































































































































































































































































































































Search results

Summary of Contents for D-XVR5108H-4KL-X-8P

Reviews:

Related manuals for D-XVR5108H-4KL-X-8P

Brands by name

Popular brands

Dahua Technology D-XVR5108H-4KL-X-8P, User Manual

Search results

Summary of Contents for D-XVR5108H-4KL-X-8P

Reviews:

Related manuals for D-XVR5108H-4KL-X-8P

Brands by name

Popular brands