Dahua Technology D-XVR5108H-4KL-X-8P User Manual Download Page 21

Page: 21 / 330

Getting Started

cover.

HDD onto the bracket.

cable to the HDD.

4. Connect the other end of

HDD cable to the

mainboard.

5. Use the power cable to

connect HDD and

mainboard.

6. Put back the cover and fix

the screws.

2.2.6 DH-XVR7816S-4KL-X/DH-XVR5832S-X

1. Remove the screws on

the cover.

2. Fix the HDD(s) onto the

bracket. Remove the top

bracket if you want to

install HDD to the bottom

bracket.

3. Connect one end of HDD

cable to the HDD.

4. Connect the other end of

HDD cable to the

mainboard.

5. Use the power cable to

connect HDD and

mainboard.

6. Put back the cover and fix

the screws.

2.3

Installing Device into Rack

Only DH-XVR7416L-4KL-X/DH-XVR5432L-X/DH-XVR7816S-4KL-X/DH-XVR5832S-X models

support this installation.

To install the DVR into rack, do the following:

Check whether the in-house temperature is lower than 35

℃

(95

℉

) and make sure the

Step 1

15 cm (6 in.) spacing around the Device for ventilation.

Summary of Contents for D-XVR5108H-4KL-X-8P











































































































































































































































































































































Search results

Summary of Contents for D-XVR5108H-4KL-X-8P

Reviews:

Related manuals for D-XVR5108H-4KL-X-8P

Brands by name

Popular brands

Dahua Technology D-XVR5108H-4KL-X-8P, User Manual

Search results

Summary of Contents for D-XVR5108H-4KL-X-8P

Reviews:

Related manuals for D-XVR5108H-4KL-X-8P

Brands by name

Popular brands