PILOT’S OPERATING HANDBOOK
SECTION 7
DESCRIPTION
Edition 0 -- October 31, 2013
Rev. 1
Page 7.5.9
BRAKE SYSTEM
(Figure 7.5.5)
Airplane is equipped with a hydraulically actuated disc braking system installed on the main landing gear wheels.
Each toe brake at L.H. and R.H. stations is equipped with a master cylinder which sends hydraulic pressure to the
corresponding disc brake : L.H. pedals L.H. brake ; R.H. pedals R.H. brake. This differential braking helps
maneuvering during taxiing.
PARKING BRAKE
(Figures 7.5.5 and 7.5.6)
Parking brake control consists of a control knob located on pilot's side lower instrument panel and a valve which
regulates brake pressure.
To apply parking brake, press on toe brake of rudder pedals and position control knob on ON.
”PARK BRAKE”
CAS message lights on when control knob is positioned on ON.
NOTE
Operating the parking brake knob without applying pressure on rudder pedals does not
cause the wheels to be braked.
To release the parking brake, turn the selector to the left in order to set the index upwards to OFF position and
check at the same time that the
”PARK BRAKE”
CAS message disappears.