3.Installation Guidelines
© 2023 China Daheng Group, Inc. Beijing Image Vision Technology Branch 9
1)
Connect the 10GigE camera to the network port of the current host.
2)
Open the 10GigE IP Configurator of the installation package.
3)
Click "Auto Configure IP" on the right side of the GigE IP Configurator to automatically configure the
IP.
Figure 3-2 GigE IP Configurator
3.5.
Open Device and Start Acquisition
After powering the device, connecting the device to the host, and configuring the IP, you can double-click
the GalaxyView software to acquire image. The steps are as follows:
Figure 3-3 GalaxyView
