DAGON Lighting
SPL-3 –
RGB LED strip driver – DMX-512 and others
6
2.3. Preview of DMX address SPL-3 driver.
Viewing the address is possible only in mode of work SPL-3 with signal DMX-512, that
is after the earlier set in one from the codes 554, 555 or 556 which activate mode of work
with DMX-512.
To view the address of DMX button PLUS need to be hold on for more than 1 second,
green diode will turn off and the yellow will turn on.
Viewing first digit of address DMX-512:
Green diode will blink as many times as the first digit of DMX address is – 0 to 5.
Than once blink the yellow diode which is the signal for reading the second digit.
Viewing second digit of address DMX-512:
Green diode will blink as many times as the second digit of DMX address is – 0 to 9.
Than once blink the yellow diode which is the signal for reading the third digit.
Viewing third digit of address DMX-512
Green diode will blink as many times as the third digit of DMX address is – 0 to 9.
Yellow diode will turn off - address is read and accepted.
After 2 seconds since the end of read and showing the DMX address, the SPL-3 controller
goes to the regular work, means controlling RGB LED diodes in the way described by actual
configuration – via control codes.