Daewoo Solar 420LC-V, Manual

Page: 85 / 151

S0707260
Page 22 Swing Motor
3. Reassemble drive shaft (101, Figure 4),
roller bearing (443) and lower casing
(301). Pay attention to bearing alignment
inside bore of case. Make sure it is fully
seated.
4. There is a "right side" and "wrong side" on
oil seal. Be careful that you install seal
inside cover with correct side facing in.
5. Before replacing O-ring (471) in lower
casing (301), grease O-ring (and/or inside
of groove) very lightly, to facilitate
assembly and to help protect O-ring from
accidental damage.
6. Put a little grease on lip of front cover oil
seal before replacing front cover and
tapping it lightly into place with plastic
hammer.
Figure 29
Figure 30
Figure 31
Figure 32