K1000896E Operation and Maintenance Manual
Safety 1-21
BREATHING MASKS, EAR PROTECTION MAY BE REQUIRED
Do not forget that some risks to your health may not be immediately apparent. Exhaust gases and noise
pollution may not be visible, but these hazards can cause disabling or permanent injuries.
NOTE:
The equivalent continuous A-weighted sound pressure level at the workstation for this
machine is 76 dB(A).
Measurement is obtained on a dynamic machine following the procedures and cab
conditions as described in ISO 6396.
NOTE:
The guaranteed sound power level emitted by the machinery for this machine is
107 dB(A).
Measurement is obtained on a dynamic machine with the procedures as described in
2000/14/EC.
VIBRATION LEVEL INFORMATION
Hands/Arms: The weighted root mean square acceleration to which the hands/arms are subjected, is less
than 2.5 m/s
2
.
Whole Body: The weighted root mean square acceleration to which the whole body is subjected, is less
than 0.5 m/s
2
.
Measurements are obtained on a representative machine, using measuring procedures as described in the
following standard: ISO 2631/1. ISO 5349, and SAE J1166.
ASBESTOS DUST HAZARD PREVENTION
Asbestos dust can be HAZARDOUS to your
health if it is inhaled. Materials containing
asbestos fiber can be present on work site.
Breathing air that contains asbestos fiber can
ultimately cause serious or fatal lung damage.
To prevent lung damage from asbestos fiber,
observe following precautions;
•
Use a respirator that is approved for
use in an asbestos-laden
atmosphere.
•
Never use compressed air for
cleaning.
•
Use water for cleaning to keep down
the dust.
•
Work on the machine or component
with the wind at your back whenever
possible.
•
Always observe any rules and
regulations related to the work site
and working environment.
ARO1770L
Figure 18
Summary of Contents for Mega 250-V
