Daewoo Mega 250-V, Operation And Maintenance Manua

Page: 19 / 212

K1000896E Operation and Maintenance Manual Safety 1-13
STAY ALERT FOR PEOPLE MOVING
THROUGH WORK AREA
When loading a truck you should always know
where the driver is.
Avoid loading over the cab of a truck even if the
driver is in a safe spot. Someone else could
have gone inside, for any number of reasons.
Avoid working where unseen passersby might
be.
Slow down work cycle and use slower travel
speeds in congested or populated areas. Use a
commonly understood signal so that other
members of work crew can warn operator to
slow or halt work in an impending hazardous
situation.
BE AWARE OF AND CONFORM TO LOCAL REGULATIONS
Minimum levels of insurance coverage, work permits or certification, physical barriers around work site or
restricted hours of operation may be mandated by governing authorities. There may also be guidelines,
standards or restrictions on equipment that may be used to perform certain kinds of work. Check and
follow all local requirements, which may also be related to below ground hazards and power lines.
OPERATION
OPERATE WHILE SEATED AT OPERATOR'S
STATION ONLY
Never reach in through a window to work a
control. Do not try to operate wheel loader
unless you're in command position – seated at
controls. You should stay alert and focused on
your work at all times but Do not twist out of seat
if job activity behind you (or to the side) requires
your attention.
Use a spotter or signal person if you can't see
clearly and something is happening behind you.
Replace damaged safety labels and lost or
damaged operator's manuals.
Do not let anyone operate machine unless
they've been fully and completely trained, in
safety and in operation of machine.
HAOA171L
Figure 5
HAOA151L
Figure 6