Daewoo Mega 250-V, Operation And Maintenance Manua

Page: 66 / 212

2-34 Operating Controls K1000896E Operation and Maintenance Manual
PILOT CONTROL VALVE LEVER (JOYSTICK)
The machine can be equipped with several variations of a pilot control valve lever (joystick). The type of
lever is dependant upon your local market. Contact your local Daewoo Dealer for the levers that are
available in your area.
1. PILOT CONTROL VALVE LEVER
(JOYSTICK) (S/N 3001 thru 4000)
Used to position bucket and boom. This
lever is capable of raising or lowering
boom, and crowding or dumping bucket.
When machine is being traveled, the lever
(joystick) can be "LOCKED" out, to prevent
any movement of bucket or boom. To
"LOCK" out lever (joystick), place pilot
cutoff switch in "LOCKED" position.
Pilot control valve lever (joystick) operating
pattern and description of operation.
2. PILOT CONTROL VALVE LEVER
(JOYSTICK) (S/N 4001 and Up)
If loader is equipped with log forks this
lever controls boom, bucket and log forks.
The boom and bucket operating pattern of
this lever is the same as above.
A. When the log forks control lever (6,
Figure 68) is pushed forward the log
forks are allowed to open.
B. When the log forks control lever (6,
Figure 68) is pulled back the log forks
are allowed to close.
This lever is capable of forward travel and
reverse travel (2nd gear function).
HL . Hold lever in
lower mode
L . Lower
HC . Hold lever in
Bucket Crowd
C . Bucket Crowd N . Neutral D . Bucket Dump
R . Raise
HR . Hold lever in
Raise Mode
Figure 67
Figure 68
5
1
4
2
6
3
A B
BSO0530L