Daewoo Mega 250-V, Operation And Maintenance Manua

Page: 99 / 212

K1000896E Operation and Maintenance Manual Operation 3-11
MACHINE TRAVEL (STANDARD TRANSMISSION
CONTROLS)
1. Unlatch frame lock plate between front and
rear frames before traveling. Secure lock
plate to rear frame (Figure 22).
2. Set pilot cutoff switch to "I" (UNLOCKED)
position. Raise bucket to a height of 20 -30
cm (8 - 12 in) above the ground. Tilt bucket
completely back.
WARNING!
If vehicle is moved while parking brake is engaged, serious damage to parking brake disk will
result.
Select a transmission gear that is appropriate for top speed that will be traveled. Choosing a
gear that is too high will reduce acceleration and will unnecessarily heat transmission converter
oil.
Never place transmission in "NEUTRAL" when going down a hill. Over speeding transmission
can damage transmission gears.
Never change direction of vehicle travel at high speed. Serious damage to transmission will
result.
Figure 22
HBOI110L
O
I
Figure 23