Daewoo Mega 250-V, Operation And Maintenance Manua

Page: 25 / 212

K1000896E Operation and Maintenance Manual Safety 1-19
INSTALL ADDITIONAL SAFETY EQUIPMENT IF CONDITIONS REQUIRE
Laminate glass protection for the front, side or rear windows may also be recommended depending upon
particular site conditions.
Contact your Daewoo distributor for available safety guards and/or recommendations if there is any danger
of getting hit by objects that could strike the operator's cab. Make sure that all other work site crew
members are kept well away from wheel loader and safe from potential hazards.
MOVEMENT ALARMS
If wheel loader is equipped with an audible travel movement alarm, test alarm on a daily basis. Audible
alarm should sound as soon as travel system is engaged.
SEAT BELTS SHOULD BE USED AT ALL
TIMES
Whenever engine is running, operator should be
seated at the control station with seat belt
properly engaged.
KEEP A FIRE EXTINGUISHER AT HAND
It is recommended that an appropriately sized
(2.27 kg [5 lb.] or larger) multipurpose "A/B/C"
fire extinguisher be mounted in cab. Check and
service fire extinguisher at regular intervals and
make sure that all work site crew members are
adequately trained in its use.
MAINTAIN STANDARD SAFETY EQUIPMENT IN GOOD CONDITION
Machinery guards and body panel covers must be in place at all times. Keep well clear of rotating parts.
Pinch point hazards such as cooling fan and alternator drive belts could catch hair, jewelry or oversize or
very loose clothing.
Safety labels must be replaced if they are damaged or become unreadable. Information on labels gives
work crew members an important safety reminder. Part numbers for each decal and required mounting
locations are shown on pages 1-2 through 1-4 of this section.
Figure 15
HAOA080L
Figure 16