Daewoo Mega 250-V, Operation And Maintenance Manua

Page: 49 / 212

K1000896E Operation and Maintenance Manual Operating Controls 2-17
GAUGES
1. FUEL GAUGE
2. SPEEDOMETER
3. HOUR METER
4. TACHOMETER
5. ENGINE COOLANT TEMPERATURE
GAUGE
6. TRANSMISSION OIL TEMPERATURE
GAUGE
WARNING AND INDICATOR LIGHTS
7. PREHEAT INDICATOR LIGHT
8. AIR CLEANER CLOGGED WARNING
LIGHT
9. ENGINE COOLANT TEMPERATURE
WARNING LIGHT
10. ENGINE OIL PRESSURE WARNING
LIGHT
11. BATTERY WARNING LIGHT
12. LEFT TURN AND HAZARD WARNING
LIGHT
13. HIGH BEAM INDICATOR LIGHT
14. RIGHT TURN AND HAZARD WARNING
LIGHT
15. WORK LIGHT INDICATOR LIGHT
16. BRAKE FLUID PRESSURE WARNING
LIGHT
17. F/R (FORWARD/REVERSE) SELECTOR
INDICATOR LIGHT
18. PARKING BRAKE INDICATOR LIGHT
19. EMERGENCY STEERING INDICATOR
LIGHT (OPTION)
SWITCHES
20. HAZARD WARNING LIGHT SWITCH
21. LIS (LOAD ISOLATION SYSTEM) SWITCH
(OPTION)
22. FLOAT KICK-OUT SWITCH (OPTION)
1. FUEL GAUGE
This gauge displays amount of fuel in tank.
"F" means the tank is "full"; "E" means the
tank is "empty." If the pointer comes close
to the "E" (red zone), add fuel as soon as
possible. When the pointer comes close to
the "E" (red zone), approximately 32 liters
(8.5 U.S. gal.) of fuel remains.
IMPORTANT
All of gauge and warning lights (except for the turn lights, high beam light, work light and
transmission cutoff light) turn "ON" for two seconds with a warning buzzer sound when the
starter switch is turned to the "I" position.
If any light fails to turn "ON" at this time, check the cause and replace.
HBOI250L
Figure 25