background image

FOREWORD

 

Make sure to read this manual carefully and keep it handy for future reference.

 

When leasing or transferring this tractor, deliver this manual together with the tractor.

 

The specifications in this manual are subject to change without notice.

< NOTE >

Congratulations, and welcome to the fabulous world of 

CK3520 / CK4020 / CK4220 

ownership, where seri-

ous work is made fun again! 

This versatile tractor is a culmination of the entire tractor and diesel engine knowledge gained by the 

Dae-

dong Industrial Co.,LTD

 over the years since 1947. The 

CK3520 / CK4020 / CK4220 

and has been de

-

signed with the finest materials and under rigid quality control standards  set forth by the 

KIOTI

 Engineering 

Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new 

owner's familiarize themselves with the 

KIOTI CK3520 / CK4020 / CK4220

, it is the policy of 

KIOTI

 tractor 

to provide an owner's manual which includes helpful information about tractor safety, operation and mainte

-

nance. If the information you seek is not found in this manual, your 

KIOTI

 tractor dealer will be happy to help 

you. 

Please feel free to contact 

DAEDONG IND. CO.,LTD

 with your questions/concerns. 

TC220-영문-유럽,호주향-OM-00.indd   1

2018-01-15   오후 1:12:16

Summary of Contents for CK3520













































































































































































































































Reviews: