ENGINE OIL LEVEL INSPECTION
●
Support the motorcycle by main stand.
●
Start the engine and let it be warm fully.
●
Stop the engine, remove the oil level gauge and wipe it
clean.
●
Check the oil level with the level gauge by inserting it
in engine screwing level gauge.
It is good if the oil surface is between the lower level
mark and upper that of the level gauge. If the oil level
is near the lower level mark on the dipstick or below
that, full to the upper level mark with the recommended
oil.
ENGINE OIL CHANGE
●
Remove the tappet adjust hole cap.
●
Extract the spring and screen.
●
Start the kick starter arm for several times to drain any
oil which may be left in the engine.
●
Clean filter screen with a clean wash. Check if the oil
filter screen and O-ring of the screen cap are in good
condition.
●
Install the filter screen and spring.
●
Install and tighten the tappet adjust hole cap.
TORQUE : 1.5 kgf
·
·
m(15N.m)
●
Fill the crankcase with recommened engine oil.
OIL CAPACITY: 1.1
ℓ
ℓ
(After disassembly)
1.05
ℓ
ℓ
(After oil filter change)
1.0
ℓ
ℓ
(After oil change)
RECOMMENDED ENGINE OIL :
Genuine oil
API classification : SE or SH
viscosity : 10W-30
●
Install the oil level gauge.
●
Start the engine and let it idle for a few minutes.
Stop the engine and recheck the oil level.
If insufficient, supply the recommended oil.
●
Make sure that there are no oil leaks.
3-3
LUBRICATION
Make the engine warm and support the motorcycle
with its side stand in order to assure complete and
rapid draining.
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
TAPPET ADJUST HOLE CAP
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
OIL FILTER SCREEN SPRING
Summary of Contents for ROADWIN VJ125 - SERVICE
