DAELIM ROADWIN VJ125 - SERVICE, Service Manual

Page: 35 / 251

2-12
INSPECTIONS / ADJUSTMENTS
BRAKE PEDAL HEIGHT ADJUSTMENT
●
Loosen the lock nut and turn the stopper bolt until
the correct pedal height is obtained.
●
After adjustment, tighten the lock nut securely.
●
After adjusting the brake pedal height, inspect the
operation of rear brake light switch and brake pedal,
and adjust them if necessary.
BRAKE STOP SWITCH
●
Adjust the brake stop switch by turning the adjust
nut, pressing the switch so that the brake light will
come on just before the brake pedal is depressed
and brake engagement begins.
HEADLIGHT AIM
● Adjust the headlight beam vertically by turning the
headlight case adjustment bolts.
CLUTCH SYSTEM
●
Measure the clutch lever free play at the end of the
clutch lever.
FREE PLAY : 10~20mm
Adjust the headlight beam as specified by local
laws and regulations.
An improperly adjusted headlight may blind
oncoming drivers, or it may fail to light the road
for a safe distance.
BRAKE STOP SWITCH
BRAKE STOP SWITCH BRAKE STOP SWITCH
BRAKE STOP SWITCH BRAKE STOP SWITCH
BRAKE STOP SWITCH BRAKE STOP SWITCH BRAKE STOP SWITCH BRAKE STOP SWITCH BRAKE STOP SWITCH
BRAKE STOP SWITCH BRAKE STOP SWITCH
BRAKE STOP SWITCH BRAKE STOP SWITCH
BRAKE STOP SWITCH
BRAKE STOP SWITCH
STOPPER BOLT
STOPPER BOLT STOPPER BOLT STOPPER BOLT
STOPPER BOLT
STOPPER BOLT STOPPER BOLT STOPPER BOLT STOPPER BOLT STOPPER BOLT
STOPPER BOLT
STOPPER BOLT STOPPER BOLT STOPPER BOLT
STOPPER BOLT
STOPPER BOLT
BOLT
BOLT BOLT
BOLT BOLT
BOLT BOLT
BOLT BOLT BOLT
BOLT BOLT
BOLT BOLT
BOLT BOLT BOLT
BOLT
10~20mm
10~20mm 10~20mm
10~20mm 10~20mm
10~20mm 10~20mm 10~20mm 10~20mm 10~20mm
10~20mm 10~20mm
10~20mm 10~20mm 10~20mm
10~20mm
The adjustment faulty of height may caused that the
brake runs in state of operation.