Daedong 3A165D, Manual

Page: 29 / 68

ENGINE
e. Valve Spring
Item Factory Specification Allowable Limit
41.7~42.2mm 41.2mm
Free length
1.6417~1.6614in. 1.6220in.
12.0kgf/35.15mm 12.0kgf/35.15mm
Assembling load / assembling length
26.46lbs/1.3839in. 26.46lbs / 1.3839in.
1.0mm
Squareness -
0.0394in.
Item Factory Specification Allowable Limit
18.995 to 18.980mm
Rocker Arm Shaft O.D -
0.74783 to 0.74724in.
19.0 to 19.035mm
Rocker Arm Bushing I.D -
0.74803 to 0.74941in.
Item Factory Specification Allowable Limit
0.020 to 0.062mm 0.07mm
Clearance Between Tappet and Guide
0.00079 to 0.00244in. 0.0028in.
23.959 to 23.980m
Tappet O.D -
0.94327 to 0.94410in.
24.000 to 24.021mm
Tappet Guide I.D -
0.94488 to 0.94571in.
Item Factory Specification Allowable Limit
0.01mm 0.05mm
Camshaft Alignment
0.0031in. 0.0020in.
IN.(3A165D, 4A200B) 33.59mm 33.54mm
1.3224in. 1.3205in.
EX. 33.69mm 33.64mm
1.3264in. 1.3244in.
Clearance Between Camshaft 0.050 to 0.091mm 0.15mm
0.00197 to 0.00358in. 0.0059in.
Camshaft journal O.D 39.934 to 39.950mm 39.88mm
1.57221 to 1.57284in. 1.5701in.
Camshaft Counter Bore I.D 40.000 to 40.025mm -
1.57480 to 1.57579in.
Item Factory Specification Allowable Limit
0.04 to 0.11mm 0.15mm
Timing Gear Backlash
0.016 to 0.0043in. 0.0059in.
0.20 to 0.51mm 0.9mm
Idle Gear Side Clearance
0.0079 to 0.0201in. 0.035in.
Clearance Between Idle Gear Shaft and Idle 0.025 to 0.066mm 0.1mm
Gear Bushing 0.00098 to 0.00260in. 1.0049in.
Idle Gear Shaft O.D 37.959 to 37.975mm -
1.49445 to 1.49508in.
Idle Gear Bushing I.D 38.000 to 38.025mm -
1.49606 to 1.49705in.
f. Rocker Arm
g. Tappet
h. Camshaft
Cam Height
I. Timing Gear