ENGINE
I M P O RTANT :
• Install the idle gear, aligning the alignment marks
referring to the figure.
(1) Idle Gear
(2) Crank Gear
(3) Crank Gear Collar
(4) Oil Slinger
(5) O-ring
(6) Crankshaft Collar
(7) Oil Pump Gear
(8) Injection Pump Gear
(9) Cam Gear
(I) Camshaft
1. Align the holes on the cam gear (2) with the
screws to loosen them through the holes with a T
handle wrench.
2. Draw out the camshaft (1).
3. Remove the cam gear (2).
(When reassembling)
• Heat the cam gear to approx. 80
o
C
( 1 7 6
o
F
) and
insert the camshaft(1).
(1) Camshaft
(2) Cam Gear
(J) Fuel Camshaft
1. Remove the fuel camshaft stopper.
2. Loosing the fork lever holder screws, remove the
fuel camshaft (4) with fork lever holder (5), fork
lever 1 (1) and 2 (2).
3. Remove the Injection pump gear (3).
(When reassembling)
• Heat the injection pump gear to approx.
8 0
o
C
( 1 7 6
o
F
) and insert the camshaft(4).
(1) Fork Lever 1 (4) Camshaft
(2) Fork Lever 2 (5) Fork Lever Holder
(3) Injection Pump Gear
