Page 9-17
S
ECTION
9 - C
OMPONENT
R
EPAIR
Manifolds and Valves (continued)
To remove the valves
P
, remove the bolts
Q
from the bottom of the manifold
R
.
After repairs are completed, reassemble the
cooktop and test it to make sure repairs were
properly completed.
•
•
R
Q
P
Oven Component Repair
Smoke Eliminator
Turn off the gas supply at the supply valve
and power to the range at the junction or fuse
box.
Remove the oven door as described on page
8-1.
Remove the oven racks.
Remove the convection filter from the back
wall of the oven by lifting it up and out.
Remove the four (4) screws that hold the
convection baffle
A
to the back of the oven
B
and remove it.
•
•
•
•
•
Model ER48D Only: If removing the smoke
eliminator for the left oven, remove the
screws that hold the broil element
C
to the
ceiling and slowly remove it. Pull the wires
through the back wall with a gentle rocking
motion to prevent them from disconnecting
from the element inside the back wall.
Disconnect the wires from the element after
they have pulled through the wall.
•
A
B
C
