Page 9-4
D
ACOR
R
ANGE
R
R
S
ERVICE
M
ANUAL
When putting the front door glass assembly
back in place, be careful not to knock loose
the door spacers which are glued to the top
corners. Also, make sure the tabs
E
on the
bottom rest on the outside of the door liner.
Reinstall the screws on the bottom of the
door, then grasp the top of the door with both
hands and turn it over.
On ER48D Only
y: Hold the top end of the door
up with one hand. Position the handle under
the door and lower the door on top. Replace
the handle screws. Do not over-tighten.
Reinstall the oven door. See the
Door
Installation
section on page 8-2.
•
•
•
•
Door Hinges
Door Hinges
Remove the oven door. See the
Door Removal
section on page 8-1.
Lay the door, handle down, on a flat, padded
surface with the door gasket facing up.
Remove the two (2) screws
B
in the top
corners of the door.
On ER48D Only
y: Grasp the top end of the
door with one hand and pull up. Pull the door
handle out from underneath.
Grasp the top of the door with both hands
and turn it over on the padded surface so that
the door gasket faces up.
Remove the two (2) inner screws
C
on the
bottom of the door. The outer screws
D
on
the bottom of the door are part of the hinge
assembly. Do not remove them.
•
•
•
•
•
•
E
Door Component Repair
Door Component Repair (continued)
(continued)
B
B
D
C
C
C
Continued...
