Page 9-26
D
ACOR
R
ANGE
S
ERVICE
M
ANUAL
Reinstalling the Rack Support:
Insert one end of the rack support into the
oven at a 20° angle to the sidewall.
Rotate the rack support into place, matching
the four (4) protruding pins on the rack
support to the holes in the oven wall.
Mount the rack support in place using the four
(4) existing screws.
Reinstall the racks and the oven door as
described in section 8.
Test the oven to ensure that repairs were
properly completed.
•
•
•
•
•
CAUTION
To prevent damage to the oven wall,
insert the rack support carefully.
•
Light Fixtures and Meat Probe
Turn off the gas supply at the supply valve
and power to the range at the junction or fuse
box.
Remove the oven door as described on page
8-1.
Remove the oven racks from the oven
chamber.
Move the range out from the wall and remove
the right side panel according to page 8-5.
Remove the four (4) screws that hold the
right rack support
H
in place. Be careful not
to scratch the inside surface of the oven when
removing it.
•
•
•
•
•
NOTE
On model ER48D: There is no meat probe
connector on the left oven.
The rack support does not need to be
removed to service the meat probe
connector.
•
•
H
Oven Component Repair (continued)
