Page 9-8
D
ACOR
R
ANGE
S
ERVICE
M
ANUAL
If the inner widow gasket
P
must be
removed, make sure it is fit completely
into the groove around the window opening
before replacing the window assembly.
Replace the window glass assembly. The
seam in the metal rim around the inside of
the glass must be placed toward the top of
the door.
Replace the inner heat shield and tighten into
place using the existing screws.
Replace the lower outer heat shield and
tighten into place using the existing screws.
Replace the outer heat shield and tighten
into place using the existing screws.
Reassemble the door. When putting the front
door glass assembly back in place, be careful
not to knock loose the door spacers which
are glued to the top corners, loose. Also,
make sure the tabs
E
on the bottom rest on
the outside of the door liner.
Reinstall the screws on the bottom of the
door, then grasp the top of the door with
both hands and turn it over.
On ER48D only: Hold the top end of the door
up with one hand. Position the handle under
the door and lower the door on top. Replace
the handle screws. Do not over-tighten.
Reinstall the oven door. See the
Door
Installation
section on page 8-2.
•
•
•
•
•
•
•
•
•
Door Component Repair (continued)
P
E
